You can do so simply by calling the following command: May not work on some SATA controllers! This command is used to reset the DVD region counter. If you want to reset this value because you have made changes already, you should try using this option. This option lets you dump the current firmware back to disc if supported. Query current booktype settings.
|Date Added:||28 September 2014|
|File Size:||17.75 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Depending on your firmware version not all kind of discs can be changed. Only flashing within the same firmware series is supported. This way you can see what the flasher is currently doing.
In newer firmwares the number of supported booktype changes is limited to You can do so simply by calling the following command: No dumping possible for now – Add support for ADH drives v1.
This command lets you change the booktype settings of your drive. Mostly disabled for optiarc dvd rw ad-5240s. This is important if something is not working the way it should. First of all scan optiarc dvd rw ad-5240s adapters for valid devices: It is recommended to use auto-reset or RPC1 optiarc dvd rw ad-5240s instead. You should be able to work with all devices that are currently accessible in your operating system, even if the drives are ad-55240s via Firewire or USB.
You need to specify a filename that will be used for dumping the firmware and the name of the device you want to use. This behaviour may change in later versions v1. Using the flaher in this case can lead to unpredictable results.
So please use the original Microsoft IDE drivers or start the flasher with root user when running from Linux This flasher is in no way supported by the manufacturers and iptiarc cannot guarantee that this program works as expected.
Binflash is a collection of tools you may use in order to flash your DVD burner with a binary firmware file most executable flashers are also supported or to dump the Optiarc dvd rw ad-5240s ROM of your burner back to disc. Furthermore the name of your firmware file and the device are needed in order to flash your drive. Added progress bar to taskbar icon on Windows 7 – Experimental support for BluRay drives.
Instead of using perm you may also use temp if you just want to use the temporary settings that only optiarc dvd rw ad-5240s until the next drive reset. Now you probably want to update your drive with a new firmware.
Now you should backup your current firmware by issueing the following command, using optiarc dvd rw ad-5240s device that you got during the device scan: Each CD drive reads audio discs slightly out a number of samplesif your CD drive supports ‘Accurate Stream’ it will be a constant value, this value tends optiarc dvd rw ad-5240s be the same for each particular make and model of CD Drive.
Do NOT optixrc to switch from master to slave or vice versa by just flashing a different firmware! This option lets you dump the current firmware back to disc if supported.
May not work on some SATA controllers! The program will display the current disctype, the booktype of the disc and the vdd current booktype settings. This ad-5240w was never released v1. This command is used to reset the DVD region counter.
B’s DVD Professional2 アップデート履歴
Any feedback is highly appreciated, especially for versions that do not run on Microsoft operating systems. A small number of drives have [Purged] as the offset, these optiarc dvd rw ad-5240s were found not to have a constant drive offset perhaps different manufacturing batches, or firmwaresas such they have been removed from AccurateRip’s drive database should you have one of these drives, 3 matching key disks will be required to configure AccurateRip. GUI should be more responsive now v1.
Removed lots of redundant code optiarc dvd rw ad-5240s Remove unnecessary operation when dumping firmware on several drives – Make sure that there’s no disc inside the drive when optiarc dvd rw ad-5240s v1. By calling -clearbt not only the counter is reset, but all booktype settings are restored to default as well.
Displays some version information. If you want to flash your drive with a new firmware, you need ad-5240z specify this option.
Neither optiarc dvd rw ad-5240s older firmwares with bitsetting based on Ricoh commands support temporary changes. There have been reports about some external enclosures that do not support sending all commands needed for a successful flash dvc the drive.
Generate more output while scanning, flashing or dumping. Depending on the manufacturer dependant version of Binflash, not all options may be available for you. Query current booktype settings.
This feature is not supported by every firmware. Depending on the optiac your version of Binflash was written for, some drives may be listed which are not supported. This function is not supported by newer firmwares. Optiarc dvd rw ad-5240s Digital Audio Extraction.
If you want to reset this value because you have made changes already, you should try using this option. Support can only be given if the version numbers are supplied.
Binflash – Universal firmware flasher for NEC and Optiarc firmwares
You can either issue a vendor reset or you can completely reset the ad-52400s counter, giving 4 vendor and 5 user changes. Post further comments in the MyCE. Should fix issues with NDA drives v1.